Preparing Article for Treatment:
– Best results and easier application are achieved when the article is in a taut position – items such as tents or annexes
should be erected with doorways and windows closed. Where this is not possible, spread on a clean surface.
– Remove any dust or dirt by lightly brushing. Severe soiling should be removed with clean, warm water – do not use
any soap, detergent or other cleaning agents.
– For mildewed fabric, a pre-treatment with sodium hypochlorite bleach (suitable products include Domestos™ and
White King™, diluted 1 part bleach to 3 parts water) is recommended to remove growth and spores (be sure to
carefully read and follow any safety instructions outlined by the bleach supplier).
– Before applying bleach, check the fabric colour is not affected by applying a small amount of the diluted solution to an
inconspicuous part of the fabric.
– Apply diluted solution to canvas with a soft brush. Allow to sit for 15 minutes then RINSE THOROUGHLY –
insufficient rinsing may result in fabric damage and interfere with water repellency.
– Allow item to dry completely before applying BradProof ™Water Proofing Treatment.
Preparation:
– Work outdoors, or in a well-ventilated area.
– Select a warm, sunny day to apply treatment.
– Some settling of the compound may occur. Ensure that the compound is thoroughly mixed before use. SHAKE
WELL.
– BradProof ™ will slightly whiten colour of fabric (particularly dark colours). Test the effects in an inconspicuous area
and allow to dry before assessing results. Where a colour change is not acceptable and mildew is not present,
BrellaGuard® Bionic Treatment is recommended.
Application:
– Compound can be applied with a sponge mop, cloth swab, brush or roller.
– Apply the compound evenly to both sides of the canvas (unless fabric is striped or patterned, when only the
underside should be coated to avoid impairment of the pattern).
– For maximum effectiveness, allow to dry completely before exposing to moisture, or folding and storing the article.
Drying time:
– Approximately 48 hours if allowed to dry in warm, sunny conditions.
Clean-up:
– Wash brushes and rollers etc., in water.
Coverage:
– Depending on fabric weight, 1 litre will treat approximately 6 m2
(underside only) or 3 m2
(if both sides of fabric are
treated.
Safety Directions:
– Keep out of children’s reach.
– Harmful if swallowed, inhaled or absorbed.
– Avoid contact with skin and eyes and work in a well-ventilated area.
– Do not treat tents, annexes etc., from the inside, and allow to dry completely before occupying.
First Aid:
– If swallowed, do NOT induce vomiting, but give plenty of water or milk and contact doctor or Poisons Information
Centre immediately.
– If contacted with skin, wash affected areas with soap and plenty of water.
